7/23/2012

RangeMax NEXT WN111 Wireless-N USB Adapter Review

RangeMax NEXT WN111 Wireless-N USB Adapter
Average Reviews:

(More customer reviews)
I've had this device for a couple of weeks now and haven't had any issues with it. It took a few more minutes than I thought it should have to set up initially, but I haven't had any problems with it once I figured out how to get it set up. Speed doesn't seem to be an issue and I'm pleased with the range. I don't have any problem using it in the basement with the router is upstairs on the other side of the house.

Click Here to see more reviews about: RangeMax NEXT WN111 Wireless-N USB Adapter

Wi-Fi - IEEE 802.11b/g - 300Mbps

Buy NowGet 50% OFF

Click here for more information about RangeMax NEXT WN111 Wireless-N USB Adapter

Read More...

7/22/2012

Airlink AWLL3055 USB 2.0 Wireless Adapter with 10dbi High Gain Antenna Review

Airlink AWLL3055 USB 2.0 Wireless Adapter with 10dbi High Gain Antenna
Average Reviews:

(More customer reviews)
I have used the AirLink 101, 802.11G USB Adapter with +10DBI antenna at a resort in the Colorado mountains. Their WiFi had a very weak signal so they loaned me this adapter. It consistently boosted the signal from 1 bar to 3-4 bars. Bought my own!

Click Here to see more reviews about: Airlink AWLL3055 USB 2.0 Wireless Adapter with 10dbi High Gain Antenna

Brand New!! Airlink 802.11g/802.11b Wireless Networking USB 2.0 Adapter!!Model# AWLL3055!!Factory Sealed, Never Opened!!State of art wireless networking technology while works with existing wireless routers and access points!!Performance rivals products from industry leaders at small fraction of their prices!!Supports Windows 98SE/ME/2000/XP!!Fast USPS Priority Mail with Air Shipping, Full Shipping Insurance included!!Enjoy fast wireless networking without need to open the computer case!!Powerful 10dbi antenna integrated with the USB 2.0 wireless adapter for wireless signal reliability!!

Buy NowGet 70% OFF

Click here for more information about Airlink AWLL3055 USB 2.0 Wireless Adapter with 10dbi High Gain Antenna

Read More...

D-Link DIR-130 NetDefend VPN Firewall8-Port 10/100Mbps Switch Review

D-Link DIR-130 NetDefend VPN Firewall8-Port 10/100Mbps Switch
Average Reviews:

(More customer reviews)
The DIR-130 was selected due to its support for incoming PPTP VPN tunnels that are compatible with the Microsoft VPN connector included with Windows. The upgrade to firmware version 1.10 has apparently resolved reliability issues reported by another reviewer. The DIR-130 allows me to access my home system securely and consistently. Over several weeks of regular use, it has performed reliably. Configuration is easy using the well-structured menus. The firmware upgrade changed the VPN user account management from the screens shown in the manual and permits many more users to be assigned in groups with individual passwords using different VPN settings (PPTP or L2TP/IPsec).
Performance of unencrypted data over my Bellsouth 3MBps ADSL connection seemed slightly faster than with the prior router, the Netgear WGR614. Due to the VPN encryption, the connection speed is however noticeably slower than non-VPN. Reducing the encryption level to 40 bits improves the speed compared with 128 bits.
There is a firmware bug (v1.10) that only occurs during remote management or managment over a VPN connection. Clicking on the "save" button, executes a script that tries to display the confirmation web page, but the address is invalid, resulting in an error screen, even though the action was successfully performed. Just log in again to resume remote management. This bug in firmware v1.10 has been reported to D-Link, without response. The bug does not occur when accessing the router over the LAN using a non-VPN connection.


Click Here to see more reviews about: D-Link DIR-130 NetDefend VPN Firewall8-Port 10/100Mbps Switch

D-Link DIR-130 NetDefend VPN Firewall8-Port 10/100Mbps Switch

Buy NowGet 14% OFF

Click here for more information about D-Link DIR-130 NetDefend VPN Firewall8-Port 10/100Mbps Switch

Read More...

7/21/2012

New TP-Link Network TL-WN861N 300Mbps Wireless N Mini PCI Adapter Retail Complies With IEEE 802.11n Review

New TP-Link Network TL-WN861N 300Mbps Wireless N Mini PCI Adapter Retail Complies With IEEE 802.11n
Average Reviews:

(More customer reviews)
This product worked well in my Dell Inspiron laptop... note however, that the TL-WN861N only has two antenna connections, and the picture attached to this description incorrectly shows the TL-WN961N which requires three antenna connections. It appears that a number of the Amazon retailers have this incorrect picture (TL-WN961N) shown when they are describing/selling the TL-WN861N. If you need two antenna connections this (TL-WN861N) is the unit for you. If your PC has the option of connecting a third antenna for extended range you may wish to verify with the seller that you are getting the correct card.

Click Here to see more reviews about: New TP-Link Network TL-WN861N 300Mbps Wireless N Mini PCI Adapter Retail Complies With IEEE 802.11n

The TL-WN861N Wireless N Mini PCI Adapter complies with IEEE 802.11n, IEEE 802.11g, and IEEE 802.11b standards. Wireless transmission rates can reach up to 300Mbps. The Mini PCI card adopts 2*2 MIMO technology providing even better wireless performance, transmission rates, stability and coverage. At the same time, CCA technology automatically avoids channel conflicts using its channel selection feature. This product supports 64/128/152-bit WEP encryptions, as well as WPA/WPA2 and WPA-PSK/WPA2-PSK encryptions and mechanisms in addition to the adapter´s QSS (Quick Secure Setup) feature, allowing users to quickly and easily configure wireless security. This product can also simultaneously operate bandwidth intensive applications such as voice and video. Applications using a lot of bandwidth that are sensitive to interruptions such as voice and video applications are given priority in order to assure quality. It also works well with other 11g and 11n protocol wireless products.

Buy Now

Click here for more information about New TP-Link Network TL-WN861N 300Mbps Wireless N Mini PCI Adapter Retail Complies With IEEE 802.11n

Read More...

Belkin F5D8010 Wireless Pre-N 802.11x Pre-N Notebook PC Card Adapter Review

Belkin F5D8010 Wireless Pre-N 802.11x Pre-N Notebook PC Card Adapter
Average Reviews:

(More customer reviews)
I am a Senior Network Engineer and I have been doing various things in designing, building, and fixing all kinds of networking equipment for about 13 years now. I have installed from scratch several enterprise (or very large office) class wireless networks. I use the Belkin Pre-N wireless router and laptop cards at home for a few reasons:

First to get the best benefit out of the Belkin Pre-N card you'll want to use it in conjunction with the Belkin Pre-N router. Then you'll want to upgrade the Pre-N router firmware (or software) to the latest version available on the Belkin web site.
1) The Speed - 108 Mbps (Mega Bits Per Second) which is faster than the standard 100Mbps Ethernet card in most PC's. However you will never really see this full speed due to the error correcting, radio interference, and overhead in the wireless protocol, but the Belkin Pre-N laptop card in conjunction with the Belkin Pre-N router will be at least 2 times faster than your standard 802.11G wireless cards (including the built in wireless cards in most laptops today). One thing to note you will only see the greater speed if you use the Belkin Pre-N card along with the Belkin Pre-N router. If you don't you'll only get the standard 802.11G speed (54 Mbps). The Pre-N designates a few things they did to double the standard 802.11G speed and it actually means the precursor to the 802.11N standard that was just recently ratified by the IEEE (Institute of Electrical and Electronics Engineers, Inc.) Incidentally Belkin now has the N1 wireless line which is compliant with the new 801.11N standard and can get theoretical speeds up to 300 Mbps (almost twice the Pre-N speed).
You can check your speed to the internet at www.speakeasy.net/speedtest. You should check your speed before installing your card (to get a bench mark of your internet speed) and afterwards to make sure it's close to the same or hopefully much better. If you find your speed slows down after installing the Pre-N card, you would want to look at what other wireless networks are operating near you. NetStumbler is a great free program [...] that will not only tell you what wireless networks are operating near you but it will tell you the all important channel they operate on. Ideally you want your wireless network channel to be 4 channels away (if possible) from any other wireless network operating near you. So if you see a wireless network near you (not yours) that is operating on channel 1, then you want to set your wireless network channel to 5 or higher. This of course gets really interesting if you have several wireless networks because 802.11G (Pre-N being an extension of that) only has channels 1 - 11 to use. So you just have to do your best to have your channel as far away as you can from all other wireless channels. Most people don't know about all of this and leave their channel on the default (channel 1) so you might be able to switch to the higher channels without many being there. The other thing that can slow your wireless network (or even cause you to get disconnected) is 2.4 GHz cordless phones. 802.11G (including Pre-N) and the slower older 802.11B standard (which operates at 11 Mbps) use the same 2.4 GHz band. I actually had to get rid of a couple of my 2.4 GHz cordless phones and buy some 900 MHz cordless phones (this was the standard before the 2.4 GHz cordless phones). The 2.4 GHz cordless phones are supposed to check for clear channels but many just go down the list from 1 to 2 to channel 3, etc because it's easier to develop the phones to do that. So when I took a phone call it would kick me off of the wireless network sometimes when my 2.4 GHz cordless phone hit the same channel as my wireless network.2) Range - The Belkin Pre-N card used in conjunction with the Belkin Pre-N router allows you to be much farther away from the Belkin router without loosing any speed or loosing your connection. Belkin boasts 8 times farther coverage than the standard 802.11G cards (like the one built into your laptop). And from what I've seen this is true. Now it may not sound like you need to be so far away from your router but the thing is, with standard 802.11G, as you get even 50 - 100 feet away from the wireless router (and especially as you add walls between your PC and wireless router) you may start to go down in your speed. The 802.11G wireless cards will start at 54Mbps and go down from there even all the way to 1 Mbps (very slow). I had this problem because I have a 2 story home with basement and my internet wiring is in the basement and therefore my Belkin Pre-N router is in the basement as well. I would then be working all the way on the second story (some 150 feet away) with several walls between my PC and wireless router and watch my wireless speed go down to 11 Mbps with the built in wireless card in my ThinkPad T43. With the Pre-N card in my ThinkPad, I maintain 108 Mbps everywhere I've gone, even outside in the yard. So the range benefit isn't just so you can go a block from your home and get wireless coverage but so that you can maintain a good wireless connection and good speed over it.3) Security - Belkin Pre-N supports WPA-TKIP, WPA-AES, WEP, and no encryption (clear). It's obviously unwise to have no encryption or clear because anybody nearby can see everything you send over the wireless network be it traffic to other computers, or things you send or receive from the internet (like your emails and website passwords). WEP is not much better and can be broken into when someone just sits in your neighborhood and sniffs less than 1 million of your network packets (usually less than 1 hour). Now having a stranger getting on your wireless network may not sound so bad but really it's like someone plugging in a network cable from their PC directly to yours only that you have no idea they did it and no idea who they are. So in addition to browsing the internet for free on your wireless network they can also try to connect to your PC, steal files from your PC, plant bad programs onto your PC, or watch the traffic you send to the internet from your PC and watch things like the login and password to your bank, etrade, etc go by. Give that some thought before you say you don't care if people connect to your wireless network. Therefore I strongly recommend you use the WPA encryption type and preferably set the Pre-N router to accept only WPA-AES encryption (the hardest to break of all of them). Once you set the Belkin Pre-N router to this, it will only accept connections of this type. You will have to come up with a long key (or key word) but this is one of the reasons why WPA-AES very secure. Along with that I would set it to 802.11G only so that no 802.11B clients (operating at 11Mbps) can connect. Running both bands causes more interference and again slows down your wireless network. I would also recommend you uncheck the box in the Pre-N router configuration that says "Broadcast SSID". By doing this you will NOT broadcast the name of your wireless network and people will not even see it when they browse for wireless networks near them. This is yet another hurdle to someone getting on your wireless network along with the WPA-AES encryption. You will know the name of your wireless network (and you should change this to something only you know as well). When you try to connect, you'll have to manually setup a wireless network in Windows and put the name in manually (not hard at all). Keep in mind only Windows XP supports WPA so if you have any other version of Windows (like Windows 2000) you would have to get special software for it to connect to a wireless WPA network. It's probably worth an upgrade anyway because Windows XP Professional runs quite a bit better than Windows 2000 or the other older versions of Windows. Again you really want to run WPA encryption. Also you'll want to set a good password on your Belkin Pre-N router so people can't connect to it and change all of this secure stuff you've set.
Conclusion: The install of the Belkin Pre-N wireless card works well and is fairly easy. The drivers they have for the card are very good also. The Belkin Pre-N router configuration is all done through a web browser and it works well too (as long as you upgrade the firmware on it to the latest on the Belkin Web site). So all and all I don't really have anything bad to say about the Belkin Pre-N products. They work very well, do what they say they can, and are pretty fast, and trouble free. They are priced well too now especially since the N1 products have come out. So as long as you're O.K with the 108 Mbps speed you should be very happy with it. But if you absolutely want the 300Mbps, then check out the more expensive N1 products that Belkin now has. This would only really matter when you are sending traffic PC to PC in your home and would not make much difference when going to the internet for anything. Remember most home internet connects are 8 Mbps or less anyway and your Pre-N card is at 108 Mbps. So the N1 products may not be worth the extra money unless you do a lot of PC to PC copying or something. But the benefits of Pre-N are definitely worth it if only for the reason that the greater range allows you to stay at full speed even if you're farther away from your wireless router.


Click Here to see more reviews about: Belkin F5D8010 Wireless Pre-N 802.11x Pre-N Notebook PC Card Adapter

The Belkin Wireless Pre-N Notebook Network Card connects your notebook computer to your wireless network with new Belkin Pre-N technology. It lets you share your broadband Internet connection farther and faster than ever.

Buy Now

Click here for more information about Belkin F5D8010 Wireless Pre-N 802.11x Pre-N Notebook PC Card Adapter

Read More...

7/20/2012

Intel Wireless WiFi Link 4965AGN - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft) Review

Intel Wireless WiFi Link 4965AGN - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft)
Average Reviews:

(More customer reviews)
It came preinstalled in my Dell E1505. It works virtually in every Wi-Fi you might find. I tested it in 802.11n 2.4GHz and 5GHz frequencies and works great.
Important: Make sure you get the latest drivers. When I purchased the computer back on February 2007, I had to disable the 802.11n and use 802.11g because the technology was new and the compatibility with my Airport Extreme was bad. Eventually, both the router and the Intel card got firmware updates and worked just fine.

Click Here to see more reviews about: Intel Wireless WiFi Link 4965AGN - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft)

NIC 4965AGNMM2GNPAK1

Buy Now

Click here for more information about Intel Wireless WiFi Link 4965AGN - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft)

Read More...

Creative Labs Sound Blaster Wireless Music Review

Creative Labs Sound Blaster Wireless Music
Average Reviews:

(More customer reviews)
You saw the pictures, you read the Creative's marketing spiel, your read "reviews" in ad-soaked magazines, so now here are an actual user's impressions (mine): the product does have a few shortcomings, but none of them are lethal, and all are outweighted by a really neat implementation of core features. The sound is great, the interface is nice, and the value is terrific.
The visual centerpiece of the package is the remote. It's big, substantially looking, and sports a large blue-backlit LCD screen which alleviates the need to use a TV for visual navigation. The menu structure is laid out well, the navigation buttons are laid out conveniently, and the fonts are crisp and easy-to-read Tahoma-like type. You can either navigate your collection by Artist/Album/Genre/etc, or use playlists created on your PC, or use "smart playlist" such as "newest added tracks" or "most often listened" and such. There are loop/shuffle controls, but no timed auto-shutoff, which would be handy in a bedroom. The remote's LCD is apparently capable of displaying different fonts and graphics, but alas doesn't use them for anything except the boot-up splash screen and volume control bars. Perhaps Creative could implement a spectrum alanyzer or use larger type for Now Playing track info. Also, I am puzzled why Creative didn't make the buttons backlit as well, having all the componentry for that already in design.
The receiver is a small and clean-looking black/silver brick in a slim paper-back NY Times bestseller format. It can either be propper upright on an included stand, or layed flat. It has green/red/amber leds that indicate whether the unit is powered up, searching for the network, and connected to your its server software running on your PC. Since the remote communicates to it using two-way radio, the most logical choice to position the receiver once its configured is simply to hide it somewhere out of sight altogether. The output options include RCA-style stereo jacks. Perhaps because of the size of the unit, there is no amplifier circuitry, hence you need to use powered speakers. Additionally, the unit has an optical ("Toslink") SPDIF output, for feeding sound to your audio receiver or straight to capable speakers such as those from Roland/Edirol. Optical cables can provide for a really stealth setup! Alas, even with SPDIF the output is stereo-only, meaning that you can't play multi-channel WMA files, or stream AC-3 sound or anything like that. But given scarcity of multi-channel tracks, that's not a big loss really. The sound that you do get is very clean, equally with 802.11b and 802.11g setup. Really nothing to complain about. Worth noting is that the unit works in Infrastructure mode only. No Ad-Hoc support. If you don't have a wireless router or access point, you'll need to buy one. I am successfully using NetGear 614. With that in place, the receiver will sniff out all available wireless networks, and on each will try a DHCP request, and to discover a Media Server to latch on to.
On the PC side, the package manifests itself in a number of applications. One, Media Server, runs in the background and serves up your MP3/WMA collection to the receiver. Another one, Media Organizer, is used for cataloguing of your collection based on ID3V tags, as well as creation of playlists. There's also a piece of software to rip the tracks from your CDs. A separate Sniffer app can sense addition of new files to your collection and will trigger a corresponding update of Wireless Music's internal catalogue. For the initial configuration of your receiver, there is a Network Setup wizard. You will only have to use it if you deploy more than one Wireless Music receiver in you house, and want to give each one a unique name, or if your network is WEP-protected and you need to supply a WEP key. It utilizes a USB connection (a cable is supplied). Finally, an upgrade utility is supplied for flashing of your unit (both receiver and remote) with new firmware, also over USB.
If you ever used any Creative Labs product at all, then perhaps you're aware of the notorious quality of their software and drivers. Previous reviewers highlighted the issue of slow loading of playlists and general sluggishness of the remote. However, new receiver and remote firmware downloads dated 11/18/2003 are available at us.creative.com. By all means, go ahead and install them. They greatly improve remote's response times, and also add some features. Some, however -- such as F.F. and Rewind skipping -- don't work as claimed. That's Creative Labs for you. Just be ready for it. Same thing with their product support. I recently emailed them with a bug report describing a loss of connection between the receiver and PC if the latter is rebooted, and their support responded with a canned battery of instructions asking me to upgrade my Windows XP to SP1, or reinstall the software, or to reformat the drive and to reinstall Windows XP altogether. Standard nonsense just to make you go away and stop bothering them.
So, in a nutshell, on to Pro's and Con's.
Pros:
Great sound quality
Great receiver auto-setup features; support for 802.11g.
Great backlit RF remote with large screen; no TV required
Clean, intuitive user interface
Upgradeable firmware
Unobstrusive design
Toslink SPDIF output available
Cons:
As usual, incompetent techical support from Creative
As usual, mediocre Creative software
Buttons on the remote are not backlit
No playlist manipulation using the remote

Click Here to see more reviews about: Creative Labs Sound Blaster Wireless Music

CREATIVE Sound Blaster Wireless Entertainment gives you the freedom to enjoy all of the MP3 and other digital audio music on your PC in any room of your home or office, using your existing wireless network. The included RF remote control sports an LCD screen, which lets you scan your entire MP3 collection and choose the music you want hear -- even when the receiver is out of the line of view.OS Compatibility -Windows 98SE, ME, 2000, XP

Buy Now

Click here for more information about Creative Labs Sound Blaster Wireless Music

Read More...