HP ProCurve Switch 1400-8G 8-Port 10/100/1000 Gigabit Network Switch Review

Average Reviews:

(More customer reviews)These are great switches and just as fast as the compitition with ONE exception.. THEY DONT BREAK!
I've used them all and the major complaint I have with most home switches is the HEAT they generate. You can put money down that Your Cisco Linksys or DLINK switch is going to last about a year. They do give you a warranty and an easy replacement but I would rather buy a switch that I didnt need to exorcise the return policy every 1-2 years thank you very much.
The ProCurve Switches use external brick type power supplies that keep the heat away from your switch processor. This May be an issue for Business applications that use rack mounting, but for home use ProCurve hits a Home Run!

Click Here to see more reviews about: HP ProCurve Switch 1400-8G 8-Port 10/100/1000 Gigabit Network Switch

The HP ProCurve Switch 1400-8G is a small form factor gigabit unmanaged stackable switch with 8 ports of 10/100/1000. It features fan-less for silent operation. Primary InformationNetworking Type:SwitchForm Factor:ExternalData Transfer Rate:1 GbpsData Link Protocol:Ethernet; Fast Ethernet; Gigabit EthernetNetworking / Ports Qty:8 x Ethernet 10Base-T Ethernet 100Base-TX Ethernet 1000Base-TVoltage Required:AC 120/230 V ( 50/60 Hz )Flow control auto-uplink (auto MDI/MDI-X) ; Compliant Standards :FCC Class A certified VCCI EN 60950 ICES-003 IEC 60950 UL 60950 CSA 22.2 No. 60950 FCC Part 15 B EN 55022SystemNetworking / Compliant Standards:IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.1p IEEE 802.3xInterfaces:8 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45UNSPSC CodeUNSPSC Code:43222612Product IDUPC:882780979895Manufacturer Part:J9077A#ABA

Click here for more information about HP ProCurve Switch 1400-8G 8-Port 10/100/1000 Gigabit Network Switch

Read More...

Belkin 200 Mbps Powerline AV Adapter (Black) Review

Average Reviews:

(More customer reviews)Encouraged by positive reviews, I tried using these to connect two Airport Extreme Base Stations (AEBS) separated by one floor and about 60 feet apart. The AEBSs were set up extend a 802.11n network wirelessly. Connecting them using these powerline adapters made the speed to drop considerably. I tested transferring a 200 MB file: with AEBSs connected wirelessly the transfer rate was about 13Mbs; with powerline adapters it dropped to 2-3Mbs.
I concluded that the wiring inside the house is not suitable for using this technology.
Otherwise, the product seems to be a polished product with easy setup.

Click Here to see more reviews about: Belkin 200 Mbps Powerline AV Adapter (Black)

If you need an ultra-high-speed network connection in the farthest reaches of your home, the Belkin Powerline AV Starter Kit is just what you've been looking for. This kit includes everything you need to create a reliable, high-speed home network providing data speeds of up to 200 Mbps using your house's existing electrical wiring.
The adapter can be plugged directly into the wall or placed on a desk. Streaming Video -- Even In Your Attic With the Belkin Powerline AV Starter Kit, you can send high-bandwidth content from the Internet to computers and network devices all over your home through the electrical wiring in your house. This kit lets you convert any electrical outlet in your home into a network connection.

For instance, if you have a computer in the attic or other room where a wireless signal is weak, the Powerline AV is the perfect solution. You don't need to drill holes to extend your Ethernet cable, and you won't have to worry about the slow data speeds and intermittent dropouts that weak wireless connections are plagued with. Additionally, unlike wireless connections, the Powerline AV network connection isn't affected by factors such as cordless telephones and other wireless interference.

There is no performance penalty that comes with the convenience of the Powerline AV; data speeds along at up to 200 Mbps, meaning it can handle even heavy Internet usage, such as downloading and streaming music and video files, playing online games, and making VoIP phone calls, all without any lag time or hiccups.

Enhanced Security Keeps Out Snoopers There is no need to worry about security either. With 128-bit DES link encryption, the Powerline AV ensures that your information is safe and secure from intruders. Since the information is all transferred with wires, hackers can't simply sniff your information out of the air, as they easily can with insecure wireless connections.

Simple Plug-and-Play Setup Setup is as simple as plugging one adapter into a wall outlet and connecting it into your router, and then plugging a second adapter into any outlet wherever you need a network connection. This kit includes two adapters, so you can create a network within minutes of opening the box. If you have need for another connection, just purchase another adapter.

The Belkin Powerline AV is HomePlug AV certified, can coexist with HomePlug 1.0, and is compliant with 802.3/802.3u standards. It is backed by a lifetime warranty.

What's in the Box Two Powerline Networking Adapters, two Ethernet cables, two power cords, two wall plug adapters, quick installation guide, and CD-ROM with installation software and user manual.



Belkin Powerline AV with Amazon Video on DemandWith Amazon Video on Demand, you can instantly watch thousands of movies and TV shows online. Now, instead of watching videos on your computer, you can stream it to your home theater for a premium viewing experience. To get the best streaming video quality, update your home theater and home network by adding Belkin Powerline AV to your Amazon Video on Demand. Belkin Powerline offers the best bandwidth and fastest speeds for the ultimate video experience in your home--even in HD. Belkin Powerline is simple to install and faster than any wireless connection--just plug it in and instantly connect to the Internet. Use Powerline to stream high quality video to cable boxes, TiVo, or gaming consoles and show Amazon Video on Demand programs in your home theater as well as any other TV or computer in your home.

Click here for more information about Belkin 200 Mbps Powerline AV Adapter (Black)

Read More...

Belkin 8PORT NETWORKING SWITCH ( F5D5131-8 ) Review

Average Reviews:

(More customer reviews)This switch worked great for exactly 1 year and one day, then stopped working. I bought a Netgear gigabit switch to replace it.

Click Here to see more reviews about: Belkin 8PORT NETWORKING SWITCH ( F5D5131-8 )

Ideal for dial-up Internet connections, these Switches provide the backbone for sharing e-mail, printers, files, multiplayer games, and hard drives. One computer connects to the modem and the Switch, to become the Internet access point for all your connected computers. Using Internet Connection Sharing Software, you can now share your dial-up Internet access with up to seven additional computers-four for the 8-Port Network Switch. Expanding your network is easy-simply add more Switches through the featured uplink port.

Get 20% OFF

Click here for more information about Belkin 8PORT NETWORKING SWITCH ( F5D5131-8 )

Read More...

100FT (100 ft) Ethernet Cable for Netflix Roku Player Review

Average Reviews:

(More customer reviews)I have tried normal cat5 cable old cables that were laying around, there was horrible choppiness and pixilation, I switched to cat5e and also a cat6 cable and noticed a big difference , so newer cables are better suited for my roku

Click Here to see more reviews about: 100FT (100 ft) Ethernet Cable for Netflix Roku Player

Fully Replace Wireless, for truly flawless data transmission, perfect gift for anyone with a Roku

Click here for more information about 100FT (100 ft) Ethernet Cable for Netflix Roku Player

Read More...

D-Link DGS-2208 8-Port 10/100/1000 Desktop Switch Review

Average Reviews:

(More customer reviews)This is an unmanaged switch, which means that you can not configure Virtual Local Area Networks (VLANS) or Quality of Service (QoS) - though QoS is supported through the implementation of 802.1p, but all the attached devices must support 802.1p in order to use it. Since there is no configuration, all you have to do is plug it into power and plug your devices into it. It really is that simple for any unmanaged switch. It will automatically allow all your devices to talk to each other at the physical layer. Of course, your applications must be configured right to talk to each other, but these unmanaged devices make building the infrastructure a snap.
In answer to a previously posted review, I tested this device in the following way:
-Port 1 connected to my desktop computer with a Gigabit network interface card (NIC)
-Port 2 connected to a 10/100 switch which was connected to a gigabit ethernet storage device
-Port 3 connected to a second DGS-2208 switch which was connectedto the exact same model gigabit ethernet storage device
-Port 4 connected to a laptop with a 10/100 NIC
The point of this setup was to use the identical computer communicating with identical devices through a 10/100 connection and through a gigabit (1000) connection. I transferred a 10 GB file to the ethernet storage device through the gigabit connection first and then I transferred the exact same file through the 10/100 connection. The GB connection was about five times faster.
Now, this proves that the switch does not automatically throttle back to the slowest "connected" device. However, it does not indicate whether the gigabit connections will slow to the speed of 10/100 connections if those slower connections are actually active.
To test this, I transferred the same file from the laptop to the slower connected ethernet storage device while also transferring the file from the desktop to the faster connected ethernet stoarage device. The results? The gigabit connected devices still transferred the data at rates faster than possible on a 10/100 connection. This proves that the gigabit speeds are still achieved even when a 10/100 connection is active.
In the end, due to memory and processor limitations, this device cannot even compare to enterprise-class gigabit switches from Cisco and other providers; however, it is the best performing gigabit switch I've ever seen for under $75.
[...]------------------------------------


Click Here to see more reviews about: D-Link DGS-2208 8-Port 10/100/1000 Desktop Switch

Unmanaged Gigabit Switch, 8-Port 10/100/1000Mbps

Click here for more information about D-Link DGS-2208 8-Port 10/100/1000 Desktop Switch

Read More...

D-Link DCM-202 DOCSIS 2.0 USB/Ethernet Cable Modem Review

Average Reviews:

(More customer reviews)I bought this cable modem when I moved into my new apartment because it would be cheaper than renting one from Comcast in the long run. Everything worked fine for about a month, but then I wouldn't be able to connect to anything outside of my local network. Comcast technical support said that from their end it didn't look like anyting was connecting to their network, and my router could release and renew its IP address, so that narrowed it down to the cable modem. Unplugging the modem and plugging it back in would make it work again for 30-45 minutes at a time, but it would cut out at random without warning.
I downloaded and installed new firmware from d-link's website that was specifically for Comcast customers and everything seems to be working ok again, but I know a lot of non-technical people who wouldn't be comfortable doing that. If you are a technically unsaavy person and use comcast, you may want to purchase another cable modem all together.

Click Here to see more reviews about: D-Link DCM-202 DOCSIS 2.0 USB/Ethernet Cable Modem

D-Link, the industry pioneer in home networking, introduces another performance breakthrough - the D-Link DCM-202 High-Speed DOCSIS 2.0 Cable Modem. Powered by TurboDOX bandwidth acceleration software, the DCM-202 increases your download speeds at up to 20 times for your enjoyment of popular Internet applications, such as file sharing, audio and video streaming, and website uploading.The DCM-202 Cable Modem makes your broadband connection more efficient and effective by clearing network congestion, resulting in a boost in download speeds. With the DCM-202, you will get more out of your broadband connection with increased bandwidth and enhanced performance.The DCM-202 Cable Modem is DOCSIS 2.0 CableLabs Certified, which ensures compatibility with all DOCSIS compatible cable providers. The DCM-202 is also backwards compatible with DOCSIS 1.1/1.0 standards.The DCM-202 Cable Modem offers you the choice of Ethernet or USB connectivity. It is easy to install and is compatible with Windows 95, 98, 98SE, Me, 2000, XP, Mac OS, Unix and other popular operating systems (USB connectivity is limited to Windows 98SE, Me, 2000, XP).Connect with confidence to a certified cable Internet provider with the DCM-202 Cable Modem and enjoy a new and enhanced broadband experience.

Click here for more information about D-Link DCM-202 DOCSIS 2.0 USB/Ethernet Cable Modem

Read More...

Actiontec Ethernet over Coax MoCA Adapter - Single Review

Average Reviews:

(More customer reviews)I used this device to connection to my FIOS Actiontec router, and without a few comments from people here, you'd never get this to work properly.
First, the "quick instructions" (the only instructions as it turns out) assume that you are using a pair of these only to create an ethernet bridge over your coax. Thus, using this to connect to your FIOS router, the instructions are nonsensical.
Second, without instructions, you'll conclude you put this in between your coax cable and set top box. This will not work, even though this is apparently the way it's supposed to work. You'll get interference on your TV, things won't work, and you'll be ready to throw it in the box and return it.
In reality, you take the cable from the wall jack and get it into a coax splitter. One split goes to the set top box, the other to the device. You connect the ethernet jack to the device, and you're up and working.
If you go to Actiontec's site, they have no instructions how this will work with an Actiontec's FIOS router, despite the fact that this is probably the best use of the device!.
Anyway, once you get it hooked up, as other have said, you don't configure anything. It just works.
So it's a great product, hampered by no instructions for many people, and no help on the web site.

Click Here to see more reviews about: Actiontec Ethernet over Coax MoCA Adapter - Single

Actiontec Ethernet over Coax MoCA Adapter - Single

Get 17% OFF

Click here for more information about Actiontec Ethernet over Coax MoCA Adapter - Single

Read More...

NETGEAR XE103G-100NAS Powerline Ethernet Adapter Review

Average Reviews:

(More customer reviews)I would have rated this 5 stars but for the price. It seems a bit expensive and if wireless had been an answer probably the way I would have gone. I have been having wireless network problems and wanted something that would extend my lan in the house without lots of wiring. This is a great answer. I read the directions (made sure it was not plugged into a power strip), plugged in near my router, went upstairs, plugged it in there and it worked, no problems and as fast as when right next to the router.
I must admit there was also a somewhat unresearched idea that my data is safer on a wire network than wireless, even with the encryption that I used when my wireless worked.

Click Here to see more reviews about: NETGEAR XE103G-100NAS Powerline Ethernet Adapter

The NETGEAR XE103G 85 Mbps Powerline Network Adapter Kit lets you easily extend a home network using just the existing electric lines of your home, eliminating the need to run unsightly Ethernet wires all over your house. At 85 Mbps, you'll have more than enough speed to download music, stream videos, and make internet telephone calls without any hiccups.
True Plug and Play Installation The XE103G comes with two XE103 units. Simply plug one of them into a wall outlet and connect it to your router with an Ethernet cord. Plug the second one into the wall outlet where you need a network connection and connect it to any Ethernet-ready device. That's it. There's no software to install. You can create as many network connections as you need by connecting more XE103 units wherever you need them. Each device has easy-to-read icon LEDs for status information at a glance.
Fast Performance Each XE103 supports speeds up to 85 Mbps which is enough for multiple video streams without interruptions. The XE103 has a 10/100 Ethernet port with which you can connect a PC, gaming console, Slingbox, DVR, NETGEAR's SC101T Storage Central Turbo or ReadyNAS NV+, or another networkable device. In order to enable encryption, you need a computer with Windows Vista, XP, or 2000.
What's in the Box Two XE103 85 Mbps Powerline Network Adapters, installation guide, Ethernet cable, setup CD, and warranty/support information card.

Click here for more information about NETGEAR XE103G-100NAS Powerline Ethernet Adapter

Read More...

Cisco-Linksys BEFCMU10 Ethernet Cable Modem Review

Average Reviews:

(More customer reviews)First I need to thank all of you guys who gave the Linksys cable modem 4 and 5 stars. If it had not been for your reviews I would have sent this great modem back to Amazon.
I spent 6 hours trying to get this modem working, getting help from 4 different techs at AT&T. They told me that this modem was bad and that the cable light needed to stay on and that the Linksys modem would not register with their system. They told me I needed to send it back and get another one. {ALL FALSE} So finally I told them to connect my (their) old modem back up. Their modem worked fine.
As I was getting ready to pack my new Linksys modem up to send it back to Amazon. I decided to try it one more time. Following the exact sequence they used to connect their modem. And would you believe it? It works!!!
My problems:
1. bad tech support.
2. must remove router to register modem.
3. given wrong registration address. (MOST IMPORTANT)
4. computer must be turned off before you turn on modem.
Fool proof procedure to be up and running in 10 minutes:
1. Turn computer off.
2. If you have a router, take it out of the loop. connect directly from your computer to the modem thru the ethernet port.
3. Connect the cable.
4. turn on power to the Linksys modem, allow it to boot up.
5. turn on your computer
6. go to the registration page to register your modem. You MUST do this twice, for some reason it does not work the first time. MAKE SURE YOU GET THE RIGHT ADDRESS FROM AT&T. They failed to tell me I needed to use "https://" instead of "http://" it won't work without the "s"
enter your account # and registration #.
7. You should be working. Reconnect your router.

Click Here to see more reviews about: Cisco-Linksys BEFCMU10 Ethernet Cable Modem

If you're tired of the slow & frustrating performance of 56k modems & dial-up Internet providers, then your salvation is here in the form of the Linksys BEFCMU10 EtherFast Cable Modem. With a cable modem you are always connected to the Internet & you will experience speeds many times that of standard 56k modems. And it's easy to use. Just plug the plug-and-play device into any USB port on your PC. You can even plug it into your Ethernet port or an optional Linksys Router for easy Internet sharing through the home. Weight - 1lb.

Click here for more information about Cisco-Linksys BEFCMU10 Ethernet Cable Modem

Read More...

Intel PWLA8391GT PRO/1000 GT PCI Network Adapter Review

Average Reviews:

(More customer reviews)I needed a Gigabit NIC card for our Windows 2003 Server and I ended up choosing this one. Great price for a great card. Installation was a snap. I installed the drivers first, then powered down the server and installed the card. After rebooting the server it found the drivers and went right to work. Been performing perfectly ever since. Thanks Intel for making another great network card.

Click Here to see more reviews about: Intel PWLA8391GT PRO/1000 GT PCI Network Adapter

Intel PWLA8391GT PRO/1000 GT Desktop Network Adapter Now you can maximize system performance and increase end-user productivity for mainstream PCs with Intel PWLA8391GT PRO/1000 GT Desktop Adapter. Today's desktops are weighed down with high-bandwidth applications including voice, data, streaming video, video conferencing, and long-distance storage area networks. The environmentally friendly Intel PWLA8391GT PRO/1000 GT Desktop Adapter's Gigabit bandwidth makes quick work of these network applications with power to spare.

Get 29% OFF

Click here for more information about Intel PWLA8391GT PRO/1000 GT PCI Network Adapter

Read More...

Cisco-Linksys BEFSX41 EtherFast Cable/DSL Firewall Router (4-Port 10/100 Switch / VPN Endpoint) Review

Average Reviews:

(More customer reviews)I've used two SX41s for over three years on DSL and they are rock solid providing that I don't violate the cardinal rules of operation. The VPN tunnels are easy to set up if you follow the guidelines. First of all you must use a stable firmware. 1.45.7 is the most stable. The latest 1.52.9 is okay, but not as stable. Also you must NEVER set any of the Web Filters to deny or you will have reboots. Generally it is as simple as that.
There are also rules for flashing that must be observed. It doesn't matter whether you use a ver 1 firmware on a ver 2 router or visa versa. Thinking there is a difference is nonsense. What DOES matter is that the router MUST be reset to factory defaults (30 secs on the reset button will do this) before a flash or you risk bricking the router. When flashing with the Web page flashing tool, use IE or you will risk bricking the router. Use the TFTP utility for the SX41 obtainable from Linksys if you wish to use a Mozilla-based browser to flash. After you flash, you should reset once again to factory defaults. There are residual register settings carried over from the previous firmware versions that can cause reboots and other malfunctions.
Even the best flashing procedures can fail, but there are procedures for recovering from a bad flash at DSLReports.com. The recovery rate is probably better than 90% using those techniques. Guidelines for setting tunnels up are also posted there as well as access to the 1.45.7 stable firmware.
Successful operation of the SX41 requires modest intelligence, some networking experience, and following the operating rules. Linksys support hasn't a clue as to what those rules are so don't even bother with them unless you are trying for an RMA for a defective unit. Basically the router has gotten a bad rap from people who don't know how to operate it. Unfortunately they can't learn how to do that from the minimalist manual or from the so-called tech support personnel. Ask for operation help in the Linksys forum on the above mentioned web site if you are struggling with this router.

Click Here to see more reviews about: Cisco-Linksys BEFSX41 EtherFast Cable/DSL Firewall Router (4-Port 10/100 Switch / VPN Endpoint)

The Linksys Instant Broadband EtherFast cable/DSL firewall router with 4-port switch/VPN endpoint is the perfect solution for connecting a small group of PCs to a high-speed broadband Internet connection or a 10/100 Ethernet backbone. The router can be configured to limit internal users' Internet access based on URLs and/or time periods (URL filtering and time filtering). For enhanced protection against intruders from the Internet, the router features an advanced SPIfirewall.
Use the cable/DSL firewall router with 4-port switch/VPN endpoint to create IPSec VPN tunnels, so you can securely connect to the corporate server from your home office--or from any location, when you're on the road. The router provides a dedicated port for DMZ hosting and acts as the only externally recognized Internet gateway on your LAN. With the performance and security features of the Linksys cable/DSL firewall router with 4-port switch/VPN endpoint, your network will take advantage of the Internet while keeping its data secure.
This router is compatible with Windows 95, 98, NT, 2000, Me, and XP.
Note: All Linksys routers now include a special edition of Norton Internet Security! Claim your free CD-ROM by calling (800) 814-0180, 7 a.m. to 7 p.m. Pacific, seven days a week.

Click here for more information about Cisco-Linksys BEFSX41 EtherFast Cable/DSL Firewall Router (4-Port 10/100 Switch / VPN Endpoint)

Read More...

Actiontec GT701WG 54 Mbps Wireless DSL Gateway Review

Average Reviews:

(More customer reviews)I have had this modem for about 5 years and it is very durable. I have put 100's of terabytes through this modem and it is still going strong. The wireless is great also, because you dont need a seperate router. It even has WPA-PSK encryption, and a firewall. Would purchase from actiontec again.

Click Here to see more reviews about: Actiontec GT701WG 54 Mbps Wireless DSL Gateway

1 x ADSL, 1 x USB, 1 x 10/100Base-TX - IEEE 802.11b/g - Wireless Router

Click here for more information about Actiontec GT701WG 54 Mbps Wireless DSL Gateway

Read More...

D-Link DGS-2205 5-Port 10/100/1000 Desktop Switch Review

Average Reviews:

(More customer reviews)My model is the DGS-2205 with the 5V power adapter. Like a previous reviewer, I noticed that I wasn't getting anywhere near gigabit speeds to my LaCie Ethernet Raid device. Well, that's because the LaCie Ethernet Raid Device is a slow pig.
After connecting my Mac Book Pro and my Mac Pro to the switch, I started offloading data to the Mac Pro.
Sustained throughput was 320 megabits per second with long bursts up to 720 megabits per second. At this point, the hard drive on the Macbook Pro was the bottleneck. Normally, I don't care for D-link products, but this little switch is quite the gem.
I've also noticed no noise from the unit, even when transferring large amounts of data at near wire speed.

Click Here to see more reviews about: D-Link DGS-2205 5-Port 10/100/1000 Desktop Switch

Unmanaged Gigabit Switch, 5-Port 10/100/1000Mbps

Click here for more information about D-Link DGS-2205 5-Port 10/100/1000 Desktop Switch

Read More...

Cisco-Linksys USB Ethernet Adapter Review

Average Reviews:

(More customer reviews)I purchased this product in order to connect my Tivo (Series 2) to my internet router and bypass my home telephone connection. It has worked perfectly from day one and I have absolutely no complaints.
Before I purchased this adapter, I was told by a salesperson at Best Buy that I would not be able to connect my Tivo to the internet using this device (or any device like it) because it would almost certainly require drivers to be installed and since the Tivo lacks a CD-ROM, I would not be able to install the drivers. After some research online, I found that there are a handful of adapters like this one that are known to work well with the Tivo devices, even without drivers.
I was still hesitant when I received my adapter because I expected the drivers to be an issue. It was not. My Tivo recognized the adapter and connected right away. It couldn't have been easier.
For someone who is looking for a similar product to connect their Series 2 Tivo to the internet, I would caution that the drivers may indeed be an issue on inferior adapters, but this specific adapter has worked wonderfully for me.

Click Here to see more reviews about: Cisco-Linksys USB Ethernet Adapter

Connect your computer, game console, DVR, or other device to a wired network in seconds with Linksys' USB300M USB Ethernet Adapter. Compact and light, it connects to the USB port of your device and provides an Ethernet jack to connect to your network. The Adapter gets its power through the USB connection, so no power cord is necessary. It’s compatible with both USB 1.0, 1.1, and 2.0 ports.

Get 6% OFF

Click here for more information about Cisco-Linksys USB Ethernet Adapter

Read More...

D-Link DSL-2320B ADSL2/2+ USB Ethernet Modem Review

Average Reviews:

(More customer reviews)This thing works fine, and this review is less of a review than a cautionary tale. I purchased this fine piece of equipment and got it all hooked up and nothing happened. No internets! omg plz!
Turns out I had to adjust the settings of the modem which is fairly easy if you are a computer geek, but for me it was a bit of a challenge. D-Link support refused to help me on the basis that all they would help me with was knowing how to plug it in and making sure the unit was not defective. They suggested I talk to my ISP.

My ISP would not tell me the VCI/VCP needed but luckily the modem found that on its own using the WAN Wizard setup, however I had to manually adjust a few settings before it would work, settings that neither my ISP or D-Link support knew anything about when I asked them. I did manage to get it to work but I nearly had to send it back and buy a modem of the same brand that my ISP requires.
So in short, this thing works as it should, but I recommend you consult with your ISP prior to purchasing a modem to determine which brands they do support so as not to have to deal with d-link support.

Click Here to see more reviews about: D-Link DSL-2320B ADSL2/2+ USB Ethernet Modem

ADSL2/2+ ETH / USB MODEMTR067

Click here for more information about D-Link DSL-2320B ADSL2/2+ USB Ethernet Modem

Read More...

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP ) Review

Average Reviews:

(More customer reviews)The WLI-TX4-G54HP is not perfect, but it is one of the best bridges out there. Unlike most bridges from Netgear, Linksys, and D-Link, the Buffalo Technology WLI-TX4-G54HP has 4 Ethernet ports built in, eliminating the need for a separate switch. This is key, since the advantage of a bridge versus wireless adapters is that one bridge can be used for multiple devices (e.g. in an entertainment center to support a TiVo, Wii, Xbox, Xbox 360, PS3, Slingbox, etc). The costly and time consuming alternative is to buy and configure a separate wireless adapter per device, one of which costs as much as the WLI-TX4-G54HP, and many of which don't even support the latest network security encryption.
Compared to other network equipment, setup was relatively straightforward. If you have a Buffalo router or access point, you can use one touch AOSS setup, which worked seamlessly, defaulting to the highest level of encryption supported by all devices (e.g. WPA-AES/CCMP). However, your AOSS settings on your Buffalo router default to supporting 125 High Speed if supported by all devices on your network which can cause issues on the WLI-TX4-G54HP (see below). Also, using AOSS to configure the converter disables any custom settings on your router such as disabling SSID broadcast (a highly recommended security practice), so you'll probably opt to configure your converter manually.
With Manual configuration you have the option of using the PC configuration software or the built-in web-based configuration tool. The only hitch with using the web-based configuration tool is that you have set your computer's wired Ethernet adapter IP address manually to 1.1.1.2 since the converter's IP address defaults to 1.1.1.1 and you have to be on the same subnet to connect to it since there is no built-in DHCP server (to do this, Right-click Network Places, click Properties, right-click your Local Area Connection, click Properties, click TCP/IP, click Properties, select Use the following IP address, and enter IP address 1.1.1.2 and subnet mask 255.255.255.0). Once you change your computer's IP, you can log into the tool, change the network and security settings and change the static IP address of the configuration tool to an IP on your subnet (e.g. 192.168.x.2) so you can manage it from any computer on your network. Don't forget to change your IP And DNS back on your computer back to automatic detection after you are done configuring your device.
On the downside, if you are using the WLI-TX4-G54HP in 125 High Speed Mode mode (aka g+ SuperSpeed, Gplus, HSM, SpeedBooster, Turbo G, Xpress, WME), which is only possible when used on a network with all 125 High Speed compatible devices, it freezes up and requires a power cycle when used under intensive bandwidth conditions, which I discovered when trying to transfer video between two TiVos connected to two WLI-TX4-G54HP converters and a Buffalo WHR-HP-G54 router (all of which support 125 High Speed Mode). This can be avoided by disabling the 125 High Speed frame bursting mode on your router. You will not experience this problem on a non 125 High Speed network (or even if you have a 125 High Speed Network with any non-125 High Speed devices on it since every device must support it to enable it).
Finally, if you have WDS-compatible router, such as any Buffalo router, you are better off using another WHR-HP-G54 router as a bridge since it provides the same functionality as the WLI-TX4-G54HP but also acts as a repeater to extend your network signal, and costs about the same price online. In fact, the WHR-HP-G54 looks identical to the WLI-TX4-G54HP, except that the latter lacks a WAN port and a switch to change from router to bridge mode. The only downside to using the WHR-HP-G54 as a bridge, is that doing so requires disabling 125 High Speed Mode on your router, but since this doesn't work well anyways, it isn't really a disadvantage.

Click Here to see more reviews about: Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Click here for more information about Buffalo Technology AirStation Turbo G High Power Wireless Ethernet Converter ( WLI-TX4-G54HP )

Read More...

Netgear MR814 802.11b Wireless 4-Port Cable/DSL Router Review

Average Reviews:

(More customer reviews)I've replaced my Linksys BEFW11S4 router with Netgear MR814, and I have not been disappointed. MR814 has a better range, better user interface, and several features missing from the Linksys model.
Setup was very easy - Netgear setup wizard even recognized the type of the broadband connection I have (PPPoE-based DSL). The manual includes a handy table with settings for many US ISPs. Wireless LAN was also up and running in no time.
I have no complains about the router operation so far. It's does not drop my PPPoE connection, and is generally *not noticeable* - just like a router should be.
Features that make this router stand out in the crowded field of wireless routers: 24x7 tech support and 3yr. warranty, parental controls plus free Zero Knowledge Freedom Personal Firewall software (one-year license for up to 8 computers), and ability to update your dynamic ip address in DynDNS.org database automatically (very handy if you need to connect to your home computer).
The only downside I can think of is the size. The unit is larger than many comparable routers, although it is not as tall as others, and can be positioned vertically with the included stand, or mounted on the wall.

Click Here to see more reviews about: Netgear MR814 802.11b Wireless 4-Port Cable/DSL Router

When you connect your cable or DSL modem to the Netgear MR814 wireless router, you'll enjoy wired or wireless Internet access for all your computers, and you'll be assured of protected communications on your home or small office network. This three-in-one router, switch, and wireless access point allows you to share your Internet connection, files, and printers with other computers on the network.

Click here for more information about Netgear MR814 802.11b Wireless 4-Port Cable/DSL Router

Read More...